The first step to making a homemade sparrow trap is to assemble the necessary materials. A working knowledge of carpentry is needed for this task.
Required Tools and Materials
1 sheet of plywood (1/2 inch thick)
Jug
Hinges (2 pieces, 1 ½”)
Long treated bugle decking screws
Finished nails
Small washers
Wing nut
Sheet metal screws (6” x ½”)
Wire screen (2 sq ft)
Aluminum (10 in sq)
Flexible wire
PVC (4” diameter)
Film canister (35 mm)
Roofing nails
Hammer
Drill
Needle nose pliers
Screwdrivers
Hole saw
Metal file
Wire cutting pliers
Jigsaw
Tin snips
Instructions
Get the plywood and cut it with a saw. The dimensions for this homemade sparrow trap frame should be 18” x 10” x 5”. You can also put in a foot board if you want to place it on a table. The jug needs to fit in the 5” width frame. If necessary cut it. You can use a plastic jug so it’s easier to cut to the right size.
Get some light wood. Make it 12” long by 1 and ¼ in wide and 3/8” thick. Use white pine;...













